Do manual do Galaxy Ember:
"ASSEMBLING THE BOW (continued)
The limb bolt consists of two pieces – a tapered flathead screw and brass bezel. To properly install it, the bolt should
slide through the brass bezel and into the limb hole to engage the threads in the riser. Once the bolt is engaged with the
riser threading, use a hex wrench to completely screw in the bolt. Hand tighten it at the end so that it is snug. Do not use
excessive force to finish tightening the bolt.
Repeat this process for the Lower limb, and your bow is now ready to be strung.
To disassemble the bow for travel or storage, you must first unstring the bow, following the directions below in reverse.
Then, simply remove the limb bolts completely to take down the rest of the bow."
Google tradutor (preguiça...):
"MONTAGEM DO ARCO (continuação)
O parafuso do membro consiste em duas peças - um parafuso de cabeça chata cônica e uma arruela de latão. Para instalá-lo adequadamente, o parafuso deve
deslizar através da arruela de latão e do orifício da lâmina para encaixar nas roscas no riser. Quando o parafuso estiver engatado no
rosqueamento do riser, use uma chave sextavada para parafusar completamente o parafuso. Aperte manualmente no final para que fique bem ajustado. Não use
força excessiva para terminar de apertar o parafuso.
Repita esse processo para o membro inferior e seu arco está pronto para ser encordoado.
Para desmontar o arco para viagem ou armazenamento, você deve primeiro desencordoar o arco, seguindo as instruções abaixo ao contrário.
Em seguida, remova os parafusos dos membros completamente para derrubar o resto do arco."
Fonte: http://www.galaxyarchery.com/wp-content/uploads/Ember_2017.pdf